15kw 22kw all in one type 16 bar air compressor offer OEM for laser cutting use with advanced technology

Our oxygen compressor is total oil free, do not use any lubricate oil, and for the cylinder use stainless steel material, piston
ring is self-lubricated material, all this guarantee oxygen is clean and no-pollution. Compressor working speed is slow, normally 200-400 rpm, to keep working do 24 hours heavy duty loading, this Oxygen compressor main use for hospital oxygen supplier center, to increase oxygen supply line pressure to the room, also can boost oxygen, and filling to the cylinder, such as 15Mpa, 20Mpa, also our oxygen booster, can use in Industrial acetylene cutting, cutting steel scrap in steel factory, support Boiler oxygen combustion recycle the cryogenic liquid oxygen tank vapor oxygen to the tank.

Normally, according to customer oxygen application condition, our oxygen compressor has one pressure stage, two pressure stage, three pressure stage, and four pressure stage, and five pressure stage, by the cylinder, has single, double, three, and four cylinder.

3.Characteristic

• 1. Air cooled or water-cooled type

  2. Power range: ≤55KW

  3. Speed range: 300-600r/min

  4. Flow range: 1000Nm³/h

  5. Inlet pressure:0-0.6MPa

  6. Outlet pressure: ≤10MPa

  7. Compression stage: 1-4 stages

•  Completely 100% oil free, no oil required (depending on the specific model) 
• 2. Oxygen for VPSA PSA and LOX gas source 
• 3. NO pollution, keep the same purity into the gas 
• 4.RELIABLE and high quality, comparable to the American RIX brand. 
• 5. TOP low cost, low maintenance cost, simple operation, just change the piston ring 
• 6. 4000 hours piston ring working life under low pressure conditions, 1500-200O hours working life under high pressure conditions 
• 7. TOP brand motor, can be specially pointed out, just like the SIMENSE brand 
• 8. SUPPLY JAPAN market, Japan's strict approval quality system 
• 9. CE approved to meet the requirements of the EU market 
• 10. According to the customer's specific working conditions, the compressor is designed for single machine compression, two-stage compression, three-stage compression and four-stage compression. 
• 11. Low speed, long life, average speed 260-350RPM, 
• 12. Low noise, average noise below 75dB, can work quietly in the medical field 
• 13. continuous continuous heavy-duty operation, can run stably for 24 hours without stopping 
• 14. Each stage has an interstage safety valve. If the stage is overpressured, the safety valve will take off and release
• the overpressure gas to ensure the stable operation of the compressor. 
• 15. Each level has a temperature controller. If the temperature between the stages exceeds the standard, the temperature display will sound and light alarm.